-
MultiCam® & Camo belts are
constructed using high-quality, USA made materials. They are NOT quite
as stiff or rigid as our tactical belts & Rated to support small to
medium-size firearms, magazines and additional gear up to 6 lbs.
- Best fitting, most durable Tactical Gun Belt you’ll ever own. Precise, secure fit provides a smooth, fast draw every time.
- No Belt Holes. Instead Kore concealed carry belts use a hidden track with 40+ sizing positions, so you can adjust ¼” at a time.
- Outer layer material is rated to 250 lbs., with reinforced,
proprietary Power-Core™ center & super-fiber inner lining, to
prevent roll-over and sagging. Gun belts are One-Size & fit any waist from 24” to 54” [1.5” wide].
Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.
1 - On the back of the belt we printed a sizing ruler. Locate your pant
size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty
scissors.
2 - For example, if your pant size is 32” – cut the belt at 36” mark. If
your pant size is is close to the maximum – do NOT cut the belt.
Proceed to step 3
3 - Using the wrench that is included, loosen the screws on the back of the buckle.
4 - Insert cut or blunt end of belt into buckle teeth and clamp down
firmly. It’s OK to use force if needed (use tabletop for leverage) -
the buckle won’t break.
5 - Tighten the screws until they are flush with the buckle. You will get resistance.
6 - Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug
7 - Ideally, your belt tip should extend beyond the first belt loop by
2-3 inches. If your belt is too long – just remove the buckle and trim
off one inch at a time until the desired length is achieved. Cut with
Caution.